Tips & Tricks: How do I download and install drivers for my Zebra Printer?

**As a note: Admin rights will be required to complete this task. If you do not have admin rights on your PC, please contact your IT for assistance**

ZD410 Desktop Printer Support Site

   1.       Navigate to Drivers: 

2. Select Zdesigner V. 5 Driver for Windows

3. Select Accept and Begin Download. You should see the download in the boom left corner of the window

4. Click in the status bar to launch the Install wizard for the driver

5.  A pop-up will ask if you would like to allow this program to make changes to your PC. Select YES.

6. The Install Wizard for the Driver will appear. Select Next. 

 

7.   Confirm the location the Driver will be installed. For most users this will be Program Files, Program Files(x86), or the root of the C Drive and select Next: 

   

8.  Click Next for Driver Version Setup

9.   Check the box confirming that you have read Zebra’s note about System Configuration. 

   

10. Un-check View release notes and select Finish. 

  

11. On the Printer Installation Wizard select Next to install the driver.

12. Select Install Printer Driver and select Next

13. Accept the Zebra License agreement and select Next

14. Confirm how the Printer is attached to the PC. (for most end users this will be USB Port) and select Next

15. If you need to rename the printer, or indicate its location you can do so here, otherwise select Install

16.  You have successfully installed the ZD410 Driver. 

**This can be confirmed by navigating to Control >Devices and Printers and verifying that the your printer is now appearing.**

 

• Related Articles

• How do I uninstall and re-install printer drivers?

   **As a note: Admin rights will be required to complete this task. If you do not have admin rights on your PC, please contact your IT for assistance**                  If you do not have drivers installed already, then skip to Step 5. Unplug device ...

• Downloading & Installing Drivers for the TSC TDP-225 Label Printer

  This document will review downloading & installing the TCP Direct Thermal Label Printer on a PC         1.       Click Here to navigate to the TSC site - in the search enter TDP-225 and click the blue arrow to search 2.   With the Downloads tab ...

• How do I install my Basic Zebra Printer?

  This video will demonstrate how to install your Basic Zebra Printer

• Troubleshooting: How do I resolve the issue of a printer being listed as Unspecified?

  This indicates that the Printer Drivers did not install correctly and need to be reinstalled.   **As a note: Admin rights will be required to complete this task. If you do not have admin rights on your PC, please contact your IT for assistance**   ...

• How do I connect my Zebra Network Printer?

  This video will demonstrate how to connect to your Zebra Network Printer 1. Download drivers from the Zebra website. Click here for a step by step of that process.  2. Plug Power, Computer and Network into back of computer and verify that Network ...

• Recent Articles

• Yellow Dog Inventory Troubleshooting: Unable to start Auto-Restock for upcoming event

  This article will help you identify and resolve why you are unable to create an ‘Auto-Restock’ Issue The ‘Create New Auto-Restock’ button is greyed out, cannot be clicked on and a new auto restock cannot be created. Causes The event has not been ...

• How To: Import Interfaces by Level using Balto

  This document will review how to import interface settings for a level using the Balto import tool. Prerequisites Items are required to exist in YD already Items cannot be marked as removed. The stores must also exist in YD Yellow Dog user with ...

• How To: Update Par & Re-Order Points via the Balto Import Tool

  This document will review how to update Par & Re-Order Points via the Balto import tool With all Balto imports, be sure not to change any of the column headers in the template. Unused columns can be removed, but the headers should not be edited in ...

• How To: Update Items Store Availability via the Balto Import Tool

  This article will review how to update items store availability with the Balto Import Tool With all Balto imports, be sure not to change any of the column headers in the template. Unused columns can be removed, but the headers should not be edited in ...

• Yellow Dog/Jonas File Exchange Overview

  This document will provide an overview of the Yellow Dog Jonas File Exchange Integration Integration Approach This is a 2Way integration – pull sales and push items • Sales – pulled from a file • Items – pushed to .csv file • Codes – Inserted into ...