Tips & Tricks: How do I download and install drivers for my Zebra Printer?
**As a note: Admin rights will be required to complete this task. If you do not have admin rights on your PC, please contact your IT for assistance**
2. Select
Zdesigner V. 5 Driver for Windows
3. Select
Accept and Begin Download. You should see the download in the boom left
corner of the window
4. Click
in the status bar to launch the Install wizard for the driver
5. A pop-up will ask if you would like to allow
this program to make changes to your PC. Select YES.
6. The Install Wizard for the Driver will appear.
Select Next.
7. Confirm the location the Driver will be
installed. For most users this will be Program Files, Program Files(x86), or
the root of the C Drive and select Next:
8. Click Next for Driver Version Setup
9. Check the box confirming that you have read
Zebra’s note about System Configuration.
10. Un-check View release notes and select Finish.
11. On the Printer Installation Wizard select Next
to install the driver.
12. Select Install Printer Driver and select Next
13. Accept the Zebra License agreement and select
Next
14. Confirm how the Printer is attached to the PC.
(for most end users this will be USB Port) and select Next
15. If
you need to rename the printer, or indicate its location you can do so here,
otherwise select Install
16. You have
successfully installed the ZD410 Driver.
Related Articles
How do I uninstall and re-install printer drivers?
**As a note: Admin rights will be required to complete this task. If you do not have admin rights on your PC, please contact your IT for assistance** If you do not have drivers installed already, then skip to Step 5. Unplug device ...Downloading & Installing Drivers for the TSC TDP-225 Label Printer
This document will review downloading & installing the TCP Direct Thermal Label Printer on a PC 1. Click Here to navigate to the TSC site - in the search enter TDP-225 and click the blue arrow to search 2. With the Downloads tab ...How do I install my Basic Zebra Printer?
This video will demonstrate how to install your Basic Zebra PrinterHow do I connect my Zebra Network Printer?
This video will demonstrate how to connect to your Zebra Network Printer 1. Download drivers from the Zebra website. Click here for a step by step of that process. 2. Plug Power, Computer and Network into back of computer and verify that Network ...Troubleshooting: How do I resolve the issue of a printer being listed as Unspecified?
This indicates that the Printer Drivers did not install correctly and need to be reinstalled. **As a note: Admin rights will be required to complete this task. If you do not have admin rights on your PC, please contact your IT for assistance** ...
Recent Articles
Yellow Dog/Roller Integration Overview
This document will provide an overview of the Yellow Dog Roller Integration Integration Approach This integration can be set up as a 2Way - Pull sales & Push items or a 1Way - Pull sales Sales – Pulled from Roller Webhook Codes – Pull from Roller API ...Yellow Dog/Revel Integration Overview
This document will provide an overview of the Yellow Dog Revel Integration Integration Approach This can be set up as a 2Way – Push items and Pull Sales or a 1Way – Pull Sales Sales – Pull from Revel Webhook Codes – Pull from Revel API Items – Push ...Concessions Event Checklist
This article provides a high level overview of the steps required to successfully run an event in Yellow Dog Inventory. This is intended for Concession clients who use the Stand Sheets module to manage events. Event Checklist Before the Event ✔ Step ...How To: Log Into Stand Dog
This article explains how to log in to the Stand Dog app. It is for concession clients who use the Stand Sheets module in Yellow Dog Inventory to manage events. Why It Matters: Stand Operators need access to the Stand Dog app to enter count-ins and ...FAQs: Updating the Default Vendor
Q: Why can’t I update the default vendor on the F&B Details or Retail Details tab? A: The ability to change the primary vendor on the F&B Details or Retails Details tab of the Item Editor after an item is saved was removed. Q: How do I update the ...