FAQs: How do I verify an event is configured as an EOM Event?

FAQs: How do I verify an event is configured as an EOM Event?

Question: 

How do I verify an event is configured as an EOM Event?

Answer: 

  1.  Go to Stand Sheets > Events.

  2.  Click to highlight the event then select Edit Event.

  3. Verify End of Month? is selected.

  4. Confirm the a Stand EOM is selected from the dropdown and the correct Stand EOM profile is displayed.



    • Related Articles

    • Troubleshooting: An event that was not marked as an EOM event before the event started

      This article helps you resolve the issue of an event not being marked as EOM Event, before the event was started Issue An event was started, but not marked as an EOM event Causes The EOM Event box was not checked prior to the event being started in ...

    • How do I create an EOM Event and review reporting?

      The End of Month Process provides an accurate evaluation of inventory for a facility with extensive end of month reporting. Concessions End of Month Checklist ☐ Step 1: Configure the Last Event of the Month as an EOM Event ☐ Step 2: Run Event ☐ Step ...

    • Troubleshooting: Missing Event Sales

      Sales are missing from an event in Yellow Dog Inventory. This section outlines the most common reasons event sales may be missing, from data sync issues to recipe misconfigurations. Sales Processing Sales have not been updated. Recipe Assignment POS ...

    • Troubleshooting: Event Not Started

      This article explains what to do if your forgot to start your event. It is intended for Concession clients who manage events through the Stand Sheets module. Issue Event was not started on time. Solution Adjust your event’s Start Date/Time to the ...

    • Troubleshooting: Error Message 'There are no Event Sessions for this event'

      Stands are attempting to be added through the ‘Add Additional Stands’ button after the event has already been started and the system displays the error message ‘There are no Event Sessions for this event'. The error message ‘There are no Event ...

    • Popular Articles

    • How To: Find Your Yellow Dog Inventory Version

      Understanding which version of Yellow Dog Inventory you're using is essential when exploring new features, as some enhancements and functionalities are specific to certain versions. All client types can benefit from knowing their Yellow Dog Inventory ...

    • Feature Overview: Par & Re-Order Points

      Par levels and reorder points help streamline purchasing in Yellow Dog. Par level is the ideal quantity to keep on hand. Reorder point is the minimum quantity that triggers reordering. You can update par and reorder points in the following locations: ...

    • Tips & Tricks: How do I download and install drivers for my Zebra Printer?

      **As a note: Admin rights will be required to complete this task. If you do not have admin rights on your PC, please contact your IT for assistance** ZD410 Desktop Printer Support Site 1. Navigate to Drivers: 2. Select Zdesigner V. 5 Driver for ...

    • How To: Swap the On-Hand/Parent Size (Edit Base Unit)

      When managing items with multiple sizes, it’s essential to configure them correctly. The on-hand/parent size should always represent the base unit or smallest measurement, while additional sizes should be created for purchasing or counting sizes. If ...

    • FAQs: What are Bins?

      Question: What are Bins? Answer: Bins are optional location identifiers that specify exactly where an item is stored. You don’t need to create bins in advance. You can assign them: In the Stores tab of the item editor Through a Balto import Bins ...