How To: Turn Off Handheld Scanner Beep

The beep sound can be easily disabled on handheld scanners if you prefer not to have the sound notification when scanning items.

How to Turn Off Scanner Beep (1 min)

1. Swipe down from the top of the screen.
   
   
2. Tap USS Scan Service.
   
   
3. Press the three dots in the top-right corner, then select App settings.
   
   
4. Scroll down until you see Sound, and toggle the switch to turn it off.
   

• Related Articles

• How To: Turn Off Auto Rotate on a Handheld

  All clients should turn off Auto Rotate on handhelds to enhance the user experience when utilizing one of our mobile apps. Turning Off Auto Rotate on a Handheld (1 min) To turn off auto rotate on a handheld, follow the below instructions: 1. Swipe ...

• Handheld New User Guide

  After purchasing and receiving a handheld, this guide will need to be followed to ensure proper setup.

• Quick Reference: Charging a Handheld with Accessories (Pistol Grip, Boot Case, Hand Strap)

  Removing the detachable part of the charging cradle allows you to charge the handheld device while accessories are attached. If you use any handheld accessories, remove the detachable part of the charging cradle so the device fits properly. Follow ...

• Troubleshooting: Lost PIN Number on EA520 Handheld

  A PIN number is required for logging into a Unitech Handheld and the PIN number is either lost or forgotten. Turn off the device. Long press the power button and volume up button simultaneously to enter the Bootloader Menu. Press the volume down ...

• How To: Connect to Wi-Fi with a Handheld

  Wi-Fi connection is required to download any of the Yellow Dog Mobile Apps. Connecting to Wi FI on a Handheld (2 mins) Complete these steps to connect your handheld to Wi-Fi: Swipe up from the bottom of the screen. Find the Settings app and press to ...

• Popular Articles

• How To: Find Your Yellow Dog Inventory Version

  Understanding which version of Yellow Dog Inventory you're using is essential when exploring new features, as some enhancements and functionalities are specific to certain versions. All client types can benefit from knowing their Yellow Dog Inventory ...

• How do I use Par & Re-Order Points?

  What is a Reorder Point? The minimum quantity you would like inventory of the item to be before ordering more. Items must go below this level to trigger reorder. Items set to 0 will not reorder until you go into negative stock. This is not ...

• Tips & Tricks: How do I download and install drivers for my Zebra Printer?

  **As a note: Admin rights will be required to complete this task. If you do not have admin rights on your PC, please contact your IT for assistance** ZD410 Desktop Printer Support Site 1. Navigate to Drivers: 2. Select Zdesigner V. 5 Driver for ...

• How To: Swap the On-Hand/Parent Size (Edit Base Unit)

  When managing items with multiple sizes, it’s essential to configure them correctly. The on-hand/parent size should always represent the base unit or smallest measurement, while additional sizes should be created for purchasing or counting sizes. If ...

• What are Bins and how can I use them?

  Bins are supplemental location markers. Unlike flags they do not have to be created prior to assigning them to items and are primarily used in in the stores tab to identify more precisely where an item is located. They can also be used in Physicals ...